Skip to content

Throttle/Pedal Position Sensor 'A'/'B' Voltage Correlation

Reviewed1 source
1 source

What P2135 means

Severity not yet assessed

The control unit reports “Throttle/Pedal Position Sensor 'A'/'B' Voltage Correlation”. Code P2135 identifies the area to investigate, but it does not prove that one named part has failed without a confirming test and vehicle context.

Driveability assessment not yet available. Get a personalized AI Second Opinion for your exact car.

General information, not a diagnosis or repair instruction. Always confirm with a qualified mechanic for your specific vehicle.

Treat the throttle position system as the area to investigate first, not the part to replace first.

What this code does not prove

The throttle position system being named in this code is a symptom report, not a parts verdict. Multiple causes can share the same code, so separating them needs a test.

Where the diagnosis usually goes next

Check the signal at its source

The area P2135 identifies is the throttle position system, where two related signals disagree with each other by more than the control unit allows. A confirming test still has to name the actual cause.

How to tell the paths apart: Read the live data and compare it against the expected range for current conditions before replacing anything.

Rule out wiring and the connector

Codes of this shape often come from damaged wiring, a corroded connector, or a poor ground on the throttle position system — not the component itself.

How to tell the paths apart: Inspect the wiring and connector for the throttle position system for damage and a secure ground before replacing anything.

Before you drive on

A single code naming the throttle position system does not decide this vehicle's fate on its own. Normal running means limited, diagnosis-only use; any worsening changes that immediately.

Stop and arrange a check if

  • the engine is misfiring, losing power, or stalling
  • smoke, a fuel/burning smell, or overheating appears
  • the throttle position system's behaviour is clearly getting worse rather than staying stable

Before authorising a repair

  • Bring the complete code list and freeze-frame data relevant to the throttle position system
  • Ask for the test that confirms a fault in the throttle position system — not just the code alone

What to check first

  1. Check what the throttle position system is actually reporting right now against the range expected for current conditions.
  2. Inspect the wiring, connector, and ground for the throttle position system before replacing the component.
  3. A throttle/pedal position signal should move smoothly and proportionally from idle to wide-open throttle with no gaps, flat spots, or sudden jumps, and two redundant sensor tracks (where fitted) should stay in a fixed relationship to each other through the full range. A signal that skips, plateaus mid-travel, or where the two tracks drift apart points to the sensor, its linkage, or its wiring rather than the engine's response — sweeping the pedal slowly while watching live data is the standard way to catch this.
Cost data coming soonUpload your estimate to check if the price is fair

Frequently asked questions

Does this code tell me the throttle position system has failed?

No. It points to the throttle position system; the cause still needs to be confirmed by a measurement or targeted test.

What should I bring to the workshop?

The complete code list, freeze-frame data, and the conditions around the throttle position system — that gives the technician context, not a guess.

Was this page helpful?