Skip to content

Intake Air Temperature Circuit Range/Performance

Reviewed1 source
1 source

What P0111 means

Severity not yet assessed

The control unit reports “Intake Air Temperature Circuit Range/Performance”. Code P0111 identifies the area to investigate, but it does not prove that one named part has failed without a confirming test and vehicle context.

Driveability assessment not yet available. Get a personalized AI Second Opinion for your exact car.

General information, not a diagnosis or repair instruction. Always confirm with a qualified mechanic for your specific vehicle.

Treat the intake air temperature sensor as the area to investigate first, not the part to replace first.

What this code does not prove

The intake air temperature sensor being named in this code is a symptom report, not a parts verdict. Multiple causes can share the same code, so separating them needs a test.

Where the diagnosis usually goes next

Check the signal at its source

The area P0111 identifies is the intake air temperature sensor, where the reading is outside the range that is plausible for current engine conditions, even though the circuit itself checks out. A confirming test still has to name the actual cause.

How to tell the paths apart: Read the live data and compare it against the expected range for current conditions before replacing anything.

Rule out wiring and the connector

Codes of this shape often come from damaged wiring, a corroded connector, or a poor ground on the intake air temperature sensor — not the component itself.

How to tell the paths apart: Inspect the wiring and connector for the intake air temperature sensor for damage and a secure ground before replacing anything.

Before you drive on

A single code naming the intake air temperature sensor does not decide this vehicle's fate on its own. Normal running means limited, diagnosis-only use; any worsening changes that immediately.

Stop and arrange a check if

  • the engine is misfiring, losing power, or stalling
  • smoke, a fuel/burning smell, or overheating appears
  • the intake air temperature sensor's behaviour is clearly getting worse rather than staying stable

Before authorising a repair

  • Bring the complete code list and freeze-frame data relevant to the intake air temperature sensor
  • Ask for the test that confirms a fault in the intake air temperature sensor — not just the code alone

What to check first

  1. Check what the intake air temperature sensor is actually reporting right now against the range expected for current conditions.
  2. Inspect the wiring, connector, and ground for the intake air temperature sensor before replacing the component.
  3. An intake air temperature sensor should read close to ambient temperature after the vehicle has sat for a while (a cold soak) and rise once the engine has been running and under-hood temperatures climb. A reading permanently pinned at one extreme, or one that never changes between a cold soak and a warmed-up engine, points to the sensor or its wiring rather than an actual thermal condition — comparing the cold-soak reading against a thermometer is a reliable first check.
Cost data coming soonUpload your estimate to check if the price is fair

Frequently asked questions

Does this code tell me the intake air temperature sensor has failed?

No. It points to the intake air temperature sensor; the cause still needs to be confirmed by a measurement or targeted test.

What should I bring to the workshop?

The complete code list, freeze-frame data, and the conditions around the intake air temperature sensor — that gives the technician context, not a guess.

Was this page helpful?